Starlink Installation Services

Starlink Installation for Single Sites and Multi-Site Rollouts

Site surveys, mounting, network integration and failover testing, delivered by OSBT’s technician network in over 100 countries and territories.

8,000+

technicians

100+

countries and territories

20+ years

in network infrastructure

Trusted by

Who we work with

Businesses and Organizations

Companies adding Starlink as a primary connection or as a backup, at one location or across several.

Telecom Providers and Integrators

Connectivity providers who sell Starlink and Peplink solutions and need an experienced installation team in the field.

Services

Starlink Installation

New Installations

Starlink as the main connection for a site, or alongside an existing line as backup. For backup, we set up automatic failover: if the primary line goes down, traffic switches to Starlink without anyone needing to be on site.

Multi-site Rollouts

One process for one site or hundreds. Hardware is received, staged, configured and stored at an OSBT facility, then deployed on a coordinated schedule with a survey report for every location.

Fix Existing Installations

Connections that drop, underperform or fail over unreliably are usually caused by the installation, not the hardware. We take over sites installed by other providers and bring them up to our standards.

Diagnose

Signal, obstructions, cabling, grounding and configuration checked on site.

Reinstall

Remounting, re-cabling and reconfiguring with optional failover testing.

Combining Starlink and 5G

For more capacity or extra resilience, we install Peplink devices with SpeedFusion, which combine Starlink and 5G into a single connection. If one link drops, the connection continues on the other.

Process

How a Starlink installation works

A defined standard behind every installation, built on years of field experience.

 
01

Site Survey

Starts at the network rack. We find a mounting point within reach of power, usually within 25 m, and run a sky scan to confirm a clear view. On flat roofs, a sled mast often means no drilling.

Survey report: mounting plan, cable route, power, grounding

02

Installation

The dish is mounted as specified in the survey report. Cabling is secured and sealed at entry points, and the mount is bonded to ground in line with local code.

 
03

Configuration

Integrated into the existing network: routing, VLANs where needed and firewall rules. For backup installations, failover is set to switch automatically.

04

Testing

Signal and speed tests against multiple servers. Optionally for backup sites, we can trigger a failover and confirm point of sale, VoIP and security reconnect. Results go in the handover pack.

05

Ongoing Support

After handover, our technician network handles support tickets, remote troubleshooting and on-site visits.

Planning a site?

Every installation starts with a survey. Tell us where, and we’ll scope it.

Scale

Multi-site Starlink rollouts

Every site follows the same checklist and quality standards, regardless of location or technician.

1

Receive. Hardware is delivered to an OSBT facility.

2

Stage and configure. Units are set up and tested before shipping.

3

Store. Equipment is held until each site is ready.

4

Deploy. Installations follow a coordinated schedule, with a survey report per location.

Quality

Installation Standards

Clear sky view

Confirmed with a scan before mounting, since partial obstructions cause intermittent drops.

Sealed cabling

Entry points and outdoor connections are weatherproofed.

Grounded mounts

Masts and sleds are bonded to ground for lightning and static protection.

 

Network integration

Configured as part of the site network, with routing and firewall rules in place.

Documented failover

Documentation for every backup installation with optional failover event testing.

Pre-staged equipment

Technicians arrive with hardware that is already configured.

Option

Combining Starlink and 5G

For sites that need more capacity or extra resilience, we install Peplink devices with SpeedFusion, which combine Starlink and 5G into a single connection. If one link drops, the connection continues on the other.

 

5G coverage is checked during the site survey, so you know before installation whether bonding makes sense for the location.

Where we work

Starlink installation for operations worldwide

OSBT is headquartered in Houston, Texas, with offices and facilities in Eindhoven, the Netherlands. Our technician network covers 94 countries, so a rollout across several countries runs under one process and one point of contact.

United States

Houston, TX

Headquarters

Europe

Eindhoven, NL

Office and Logistics Facility

100+ Countries and territories

covered by 8,000+ technicians

FAQ

Frequently asked questions

Something else you need to know? Ask us directly.

How long does a Starlink installation take?

Most single-site installations are completed in one visit after the site survey. Multi-site timelines are set in the rollout schedule.

Yes. The survey confirms a clear view of the sky, the mounting point, cable route, power and grounding before anything is installed.

On flat roofs we usually use non-penetrating sled masts that sit on the roof without fixings. The survey report specifies the mounting options available for each site.

Yes. We can set up automatic failover so traffic switches to Starlink if the primary line goes down. Optionally, we can then test it on site to confirm systems such as point of sale, VoIP and security reconnect.

Yes. We can source and supply Starlink hardware as part of the installation. If you’ve already bought your equipment, we can stage, configure, and install it for you as well.

Yes. We diagnose the cause on site, reinstall where needed and bring the site up to our installation standards. Fixed sites can then move onto our ongoing support.

Our technician network spans 100+ countries and territories in the Americas, EMEA, and AIPAC.

Support tickets, remote troubleshooting and on-site visits through our technician network.

It depends on the site: mounting type, cable distance, network setup and whether failover or 5G is included. After a short call or survey we provide a quote for your sites.

Contact

Planning a Starlink rollout or fixing an existing one?

Tell us about your sites and we’ll come back with next steps for the survey, installation and support.

Prefer email? sales@osbt.com